Rak Din Engineers
Russian Russian Deutsch Deutsch Fran�is Français
Rak Din Engineers
Manufacturers & exporters of Filters & Strainers
Rak Din Engineers
Rak Din Engineers
Our Products



Parker

Balston

Finite Filter


Rak Din Engineers
Rak Din Engineers
Industrial Filters
Rak Din Engineers Rak Din Engineers




Rak Din EngineersRak Din Engineers
Rak Din Engineers
Simplex Filter

  • Simple but robust design
  • Used where flow can be interrupted
  • Doom end cover provided at top of filter so no spillage as fluid level, goes down on removal of cover.
  • Basket area to pipe C. S. A. ratio over 25:1
  • Multi Basket/Cartridge filter available in fabricated construction for


Rak Din Engineers
Simplex Filter
Rak Din Engineers
Rak Din EngineersRak Din Engineers



Rak Din EngineersRak Din Engineers
Rak Din Engineers
Duplex Filter

  • Used wherever continuous operation is required and flow not to be interrupted.
  • Consists of two filtration chambers each rated for 100% capacity.
  • Redirection of fluid flow without interruption of flow with manual change-over valve.
  • Higher flow rates handled by Disc Type Change-over


Rak Din Engineers
Duplex Filter
Rak Din Engineers
Rak Din EngineersRak Din Engineers



Rak Din EngineersRak Din Engineers
Rak Din Engineers
Bag Filter & Filter Bags

Bag filters for :
  • Larger Filtration Area with finer degree of filtration down to 1 Micron.
  • Large Dirt holding capacity higher flow rates.
Applications :
  • Incoming Process ater
  • DischargeWater
  • Coolants
  • Cutting Oils
  • Inks
  • Lubricants
  • Paints
  • Resins
  • Solvents


Rak Din Engineers
Bag Filter & Filter Bags
Rak Din Engineers
Rak Din EngineersRak Din Engineers



Rak Din EngineersRak Din Engineers
Rak Din Engineers
Other Filters

  • Cartridge Filter
  • Suction Filters
  • Pressure Filter
  • Back Flushing Filters
  • Steam Jacketed Filter
  • Compressed Air Filters
  • Gas Coalescing Filters
  • Speciality Gas Filters
  • High efficiency Liquid Filters.
  • Filters for sterile air application
  • Inlet & Exhaust Filters for vaccum pumps.
  • Gas & Liquid sample filters for analysers.
  • Steam Filters for high temperature application.
  • Membrane Filters for absolute filtration down to 0.01 microns with 100% efficiency.
  • Hydrophobic filters (Coalescers & Seperators) for ATF,HSD & MS.
  • Impregnated activated carbon Filters for oil vapour removal
    from compressed air & gases.
  • Compressed Air & Gas Coalescing Filters for removal of
    oil, water dirt from compressed air & gases down to 0.01 microns with 99.9999% efficiency.



Rak Din Engineers
Other Filters
Rak Din Engineers
Rak Din EngineersRak Din Engineers

Materials of Construction
  • Rak Din Filters are available in vast range of quality materials as per Indian & International Standards.
  • Body/Housing Material
    Cast Steel, Cast Stainless Steel, Cast Iron, non ferrous material, e.g. Brass, Gun Metal, Bronze, fabricated construction in Carbon Steel, Stainless Steel and Forged Steel.
  • Filter Element/Cartridge Material
    Wire mesh SS-304/SS-316, SS Sintered, Paper, PP, Ceramics, Glass Wool, Synthetic Fibre, Monel Metal, Hust Alloy, Brass, Cupro Nickel, Bronze and Borosilicate Glass Microfibre, Cotton, PP, Nylone and Glass Fibre Wound.
  • Seals & O Rings
    Standard seals in Nitrile, Vitone, Silicon, PTFE for longerlife.
  • Size, Range & End Connections
    Size from 15mm NB to 900mm NB Screwed/ Flanged end up to 900#as per ASA, DIN, IS, BS Standards.
  • Protective Coating
    Special protective linings/coatings of rubber, PTFE etc. used for filtration of aggressive fluids.

Testing
  • Strict quality testing/inspection for material procurement.
  • Dimensional inspection
  • NDT tests -DP Test, Magna flux Test, and Radiography.
  • Hydraulic test of Filters/Strainers at 1.5 times the normalworking pressure.
  • Pressure drop versus flow rate test.
  • Bypass valve/cock seat leak test at working pressure.

Applications
Rak Din Filters & Strainers Protect:
  • Fuel & lubrication system, spray nozzles
  • Diesel and marine engine, pumps
  • Flow meters, valves, compressors
  • Boilers, turbines, R.O. Plants
  • Membranes, Analyzers, Instruments.

Performance Characteristics
  • Flow rate up to 42,000 LPM (2500M3/Hr) in liquids and 40,000CF M in Air & Gases
  • Operating pressure up to 120 Kg/Cm2
  • Operating temperature up to 150?C
  • Degree of Filtration down to 0.01? in Air & Gases and 0.2? in liquids.








Member IndiaMART.com